| PART |
Description |
Maker |
| F-KUBAND-RX F-KUBAND-TX L-BAND-RX L-BAND-TX |
Typical L-BAND-Rx/Tx Application
|
THOR communications
|
| ET-LP2950-XX |
Typical application data 100 mA adjustable regulator
|
Estek Electronics Co. Ltd
|
| BGA312 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 11 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz)
|
Siemens Semiconductor Group
|
| Q62702-G0041 BGA310 |
Silicon Bipolar MMIC-Amplifier (Cascadable 50 W-gain block 9 dB typical gain at 1.0 GHz 9 dBm typical P-1dB at 1.0 GHz 3 dB-bandwidth: DC to 2.4 GHz)
From old datasheet system
|
SIEMENS AG
SIEMENS[Siemens Semiconductor Group]
|
| VTD175 VTD170XS VTD170 VTD175L VTD175S VTD175XL VT |
85 ∑C to -40 ∑C 10 times % typical resistance change
85 ∑C to -40 ∑C 10 times 【5 % typical resistance change
POLYFUSE RESETTABLE FUSES
85 °C to -40 °C 10 times ±5 % typical resistance change
|
Littelfuse, Inc.
|
| MPX2100 MPX2100A MPX2100DP MPX2100GVP MPX2100AS MP |
0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL) 000千帕4.5 PSI）的全尺寸为40 mV跨度（典型）
(MPX2100 / MPX2101) 0 to 100 kPa (0 to 14.5 psi) 40 mV FULL SCALE SPAN (TYPICAL)
Sensor
|
Motorola Mobility Holdings, Inc.
Motorola, Inc.
MOTOROLA[Motorola Inc]
MOTOROLA[Motorola, Inc]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| ZL60012 ZL60012TBD |
1300 nm, 1550 nm 270 Mbps PIN preamplifier for SDI digital television.
1310 nm, 1550 nm 270 Mbps PIN Preamplifier for SDI Digital Television
|
Zarlink Semiconductor Inc
|
| OTS-3SD |
Optiva Standard, 3 SDI
|
Opticomm Corporation
|
| 420000900-3 416016440-3 |
Single Channel HD-SDI Adapter
|
List of Unclassifed Manufacturers
|
| ADC-8032A ADC-8032A-S ADC8032A |
Analog Composite to SDI Decoder
|
ETC[ETC]
|
| GS3140 |
Multi-Rate Adaptive 3G SDI Equalizer
|
Semtech Corporation
|
